PRO Steel® M Series
Manual flexybility
Pro Steel® M Series
Focussed on MANUAL deburring, grinding, corner rounding and surface finishing
| Pro Steel® M Series | ||||||||
|---|---|---|---|---|---|---|---|---|
| PRO Steel® M Series | Small Bur removal | Bur removal | Slag removal | Edge Rounding | Laser Oxide removal | Rust Removal | Surface finish | Calibrating |
| PSDM-M Manual Serie | +++ | +++ | + | + | +++ | +++ | ++ | + |
| PSG+xxxxxx-M Surface PLUS Series | +++ | +++ | ++ | + | +++ | +++ | ++++ | + |
PRO Steel Series : Code key = P-x-S-y-z-000-w
How to read the machine types?
| Code | P-x-S-y-z-000-w | component unit |
|---|---|---|
| x | Digit between P-S | |
| 2 | Two sides simultaneously up and down deburring | |
| y | First digit after PS (Profimach Sander) | |
| - | Automatic operation | |
| M | Manual operation | |
| z | codes placed in sequence of machining | |
| 2-3-4-5-6 | Number BEFORE letter is the quantity of the letter following | |
| B | Brush full width | |
| C | Chain Belt transversal | |
| D | Disk brush vertical | |
| H | Disk Brush vertical with hammer function | |
| G | Gyro or planetary barrel brush or fladder type | |
| R | Roller- Contact roller with full width abrasive belt | |
| T | Transversal Small Belt | |
| OOO | Width of working surface in mm | |
| w | at the end after width value | |
| W | Wet working | |
| II | Second Generation | |
| III | Third Generation | |
| - | Dry working |
Profimach deburring machines, Jonsen Sander deburring machines, Jonsen sander, deburr and edge round punched/stamped and laser-cut parts, double-sided deburring, single side deburring, Oxide removal and surface finishing, deburring, deburring machine, deburring Machines, FLAT DEBURRING MACHINE, plate deburring machine, sheet deburring machine, deburring solution, automated deburring, edge rounding, edge processing, rounding, deburr and edge round, clean edge, oxide removal, surface finish, grinding, hand grinding, double-sided, single-sided, single pass, punched, laser, laser beads, cut, thin sheet metal, parts, burrs, splatters, light burrs, laser deburring, high quality results, small parts, brushes, quick change, three dimensional, industrial sheet metal processing, economical deburring, Metal Polishing Machines, deburring brush, metal parts with burrs, sheet metal with burrs, metal parts with burrs, punched parts with burrs, laser parts with burrs, plasma parts with burrs, flamecut parts with burrs, heavy burrs, light burrs,